ANDER T-1000 PNEUMATIC POLYURETHANE FOAM PLANER

_{Specialized planer for trimming polyurethane foam}

• Reliable and fast device for foam trimming
• Brush with stiff wire
• Durable high-quality foam planer
• Cutting size - 45cm
• Spare brushes available
• Durable pneumatic motor
• Ball bearings on cutting shafts
• Pneumatic motors require 125 PSI

Motor Requirements:

The pneumatic foam cutting motor works most effectively when air pressure is maintained at 125 psi. An air compressor with a minimum output of 710 l/min is required. The incoming air should be dry, clean, and filtered. Lubricate the tool at least once every 8 hours by pouring a small amount of motor oil through the air intake.

Safety:

Although every effort has been made to ensure the foam planer is as safe as possible, it is the user's responsibility to wear appropriate protective equipment. A full-face mask and eye protection are a necessity. As with any power tool, exercise common sense when operating. Do not wear loose clothing or jewelry that could be caught by moving parts, causing injury.